Question - Can you use LED bulbs in a ceiling fan?

Answered by: Phillip Anderson  |  Category: General  |  Last Updated: 24-06-2022  |  Views: 1465  |  Total Questions: 14

Outdoor ceiling fans can benefit from an LED bulb. Their light is just as powerful as CFL or incandescent bulbs without generating the same levels of heat while on. Indoor ceiling fans can benefit from an LED bulb as well, but must be connected to a toggle switch only in most circumstances. Fluorescent light ceiling fans use compact fluorescent light bulbs (CFL) and use 75% less energy than incandescent lights. Fluorescent light bulbs have a longer lifespan than halogen bulbs, but not as long as LEDs. The Philips Soft White Dimmable Light Bulb has high energy efficiency. Compared to an incandescent light bulb of the same wattage, these bulbs operate on 80 percent less energy. An LED bulb that uses 60 watts will replace a 500w or 600w incandescent bulb, AND if your fan says “Do not exceed 60w”, then go ahead and use that monster LED bulb. A dimmer switch should never be connected to a ceiling fan motor. You should not use an LED bulb if the lighting kit is directly wired to a dimmer switch either. There are LED bulbs that are dimmable, but be sure the load going through the fixture is compatible with the bulb.

Warm white and soft white will produce a yellow hue, close to incandescents, while bulbs labeled as bright white will produce a whiter light, closer to daylight and similar to what you see in retail stores. The lower the number, the warmer (yellower) the light.

If your socket says not to exceed 60-Watts, it is referring the dangers of high heat output associated with incandescent bulbs. However, LED's do not emit dangerous levels of heat. Thus, if your fixture says “not to exceed 60-Watts” but you want to use a 100-Watt equivalent LED bulb, this would be safe to do so.

Generally speaking, the maximum wattage ratings are printed on the light-bulb sockets of the light fixture or lamp. You will see language that reads something like: "Caution: Use only Type A lamp, maximum 60 watts. "

Vibrations. Vibrations are a major cause of early incandescent bulb failure. It does not take much vibration to damage the delicate tungsten filament wire used to produce the light. You can reduce the chances of early bulb failure due to small amounts of vibration by using appliance- or fan-rated light bulbs.

Try to target a rated life of at least 15, 000 hours, but make sure you're not sacrificing too much lumen output for it (remember, 800 lumens is equivalent to a 60-watt incandescent light bulb).

Because CFL light bulbs are designed to fit in standard light sockets, there's no problem with adding them to a ceiling fan light. CFL bulbs are designed to be more energy efficient than regular bulbs, while giving consumers the advantages of a fluorescent light.

How to Determine Light Bulb Base Type Look for threads on the light bulb base. Look for pins. Identify a plug-in type base by the appearance of a rectangular protrusion on the plug end of a compact florescent bulb. Determine if the bulb is a bayonet type base by looking for a smooth sided base, such as a screw base without threads.

Light dimmers with incompatible lightbulbs (such as LEDs) can flicker when they're set on low. Fortunately, this is not a dangerous situation either, however annoying it may be. “The only solution is to try a different type or brand of LED light, or change the dimmer itself, ” suggests Orr.

Using an LED bulb in an enclosed fixture when it isn't designed for that may cause the bulb to overheat, potentially causing damage to the light bulb and fixture. Even a little extra heat can shorten the lifespan of the bulb and keep you from enjoying the full value of your investment.

One question that often comes up is this: “Can I use an LED with a higher wattage equivalent than the bulb I am replacing, such as a 100-Watt equal LED bulb in a 60-Watt rated socket, to get more light from my fixture? ” The short answer is yes—as long as it still consumes fewer watts than the fixture is rated for.

2. Determine much light you need If you used to buy 100 watt bulbs, look for a bulb with 1600 lumens. If you used to buy 75 watt bulbs, look for a bulb with 1100 lumens. If you used to buy 60 watt bulbs, look for a bulb with 800 lumens. If you used to buy 40 watt bulbs, look for a bulb with 450 lumens.

Newer ceiling fans may require Mini Candelabra while older ceiling fans may have a standard medium light bulb fitting. The easiest way to determine size which LED bulbs you need is by measuring the base of the bulb that is already installed in your ceiling fan.

Unfortunately, due to the heat entrapment of enclosed fixtures, not all LED light bulbs can be used. Or perhaps it is better to say that they should not be used. It may still be possible to use your regular LED bulb in the enclosed fixture, but with a shortened life span and the potential for premature dimming.

Fans range in size from 36 inches to 56 inches using 55 to 100 watts, a typical 48 inch ceiling fan will use 75 watts.