Question - How much does Hardibacker cost?

Answered by: Frank White  |  Category: General  |  Last Updated: 21-06-2022  |  Views: 1404  |  Total Questions: 14

x 1/4 in. Cement Backerboard-220022 - The Home Depot. Compare all Specifications. $8. 98 Was $9. 84 Save 9% $11. 48 Was $12. 94 Save $1. 46 (11%) $19. The Cost. Hardie board siding runs about $0. 70 to $5. 25 per square foot. This could lead to a total cost of anywhere from $4, 700 to $13, 300. When butting HARDIBACKER ® sheets to 1/2" drywall, tack 1/4" thick furring strips to each stud. In wet areas, install a moisture barrier (such as 15 lb. roofing felt) between studs and HARDIBACKER ® sheets. Install sheets 1/4" above floor, tub or shower pan. Specifications Series Name HardieBacker Weight (lbs. ) 39 ASTM C1288 Compliant Yes ANSI A118. Weight: 2. 6 lbs/sq.

HardieBacker board is definitely the go-to choice when it comes to tiling and counter tops. The Durock board is abrasive and can damage certain surfaces—particularly porcelain, vinyl, and enamel–whereas HardieBacker does not contain any abrasive materials and is, therefore, the preferable board for underlaying.

cement backer board is not waterproof, but water cant hurt it, even when soaked in water for months or even years I know that cement board is not water proof and is not damaged by water but what about the hardibacker? The hardibacker seems to be some kind of fiber board.

At face value, fiber-cement siding appears to cost less than brick. When maintenance and painting are factored into construction costs, however, brick becomes a much better value for homeowners and builders. Brick is naturally insect- and moisture-resistant. The same cannot be said of wood and fiber- cement siding.

Fiber Cement Sliding is a Value Raise One way to instantly increase your home's value is to add fiber cement siding. Adding fiber cement siding to your home adds to the curb side appeal, as well as keeping a lid on energy costs.

Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.

Cement Board Screws are designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Backer-On's patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile.

Backer board is commonly available in four thicknesses—1/4, 1/2, 7/16, and 5/8 inch—and in two sizes: 3 feet x 5 feet and 4 feet x 8 feet. A 3 x 5–foot sheet of 1/4-inch backer board costs between $9 and $11; the same-size sheet in 1/2 inch costs about $12 to $14.

They are very different materials. Hardibacker isn't as fragile as Durarock or the other cement boards. Sorry but I am correct in that Hardi-Board is a Brand name and Cement Board is also a description of the composition of Hardi Brand product.

Floors. Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment. They also require a 3/4-inch subfloor where tile size exceeds 12 inches.

Cement board attached to plywood or similar underlayment will hold with only 1 1/4-inch screws; for thick or heavy metal fixtures, use 1 5/8-inch screws. In general, 1 1/2-inch galvanized nails will hold the board firmly in place.

Fasten a minimum of 12 screws into the board (4 rows of 3 screws). Keep fixings between 15mm from board edges and 50mm from board corners.

HardieBacker cement board is a tile underlayment made for wet areas like kitchens and bathrooms. This cement-based backer board, made of 90% Portland cement and sand, resists damage from moisture, provides excellent tile adhesion, and is formulated with MoldBlock Technology to protect the board from mold growth.

You may tile over existing tile, painted or unpainted drywall, plaster and textured walls. However, tiling over tile can add quite a bit of thickness, so make sure your wall can handle the weight. You should not tile over wallpaper, glossy surfaces, lead paint or plywood.