But a higher ceiling may mean higher construction and energy costs. Find out why—and if it's worth it. While any room can be vaulted, depending on your personal preference, most homeowners choose to vault the ceiling in a family room or great room where the effect can be fully appreciated. Depending on how steep your roof pitch is, vaulting a 20-by-20-foot room creates a new ceiling that's 11 to 12 feet high at its peak. The price isn't low, though. You'll pay $18, 000 to $25, 000. Vaulted ceilings add stunning height and architectural features to your home. But converting a traditional ceiling to a vaulted ceiling isn't as simple as removing ceiling joists and nailing wall board to the bottom of the rafters. If you see a complicated framework of 2x4s held together with perforated metal plates, your roof is framed with trusses. You'll have to remove the entire roof structure to vault the ceilings. But if it's framed traditionally with big lumber rafters, the roof can stay in place. Second, measure the depth of the rafters. Vaulted ceilings can add value if they are appropriate to the home's age, style and character. The overall condition of the home has the most impact on value, however, so vaulted ceilings will not offset the harm done by structural problems.
The higher the ceiling, the lower the room temperature. Houses with low ceiling are suitable for colder climates because they help to keep the house warm, whereas houses with higher ceilings are suitable for warmer climates because they provide better air ventilation and keep temperatures lower.
The cost of removing and replacing a ceiling starts at $1. 50 to $3. 25 per square foot for a standard, 125-square-foot project.
Tray ceilings are certainly not outdated in this day and age. They can, however, look outdated if executed incorrectly. Modern design allows for the incorporation of tray ceilings, even in contemporary homes. Let's take a look at tray ceilings and how it can be used today.
The two primary elements of a coffered ceiling are the crossed beam pattern and the infill panels that span between them. Tray ceilings, on the other hand, are made up of a single raised area of a ceiling in the center of a dropped border that runs along the perimeter of a room.
Today's standard ceiling height is nine feet. Newer houses are often built with nine-foot ceilings on the first floor (and, sometimes, eight-foot ceilings on the second story).
Raising the Ceiling Height Doing that creates a “hinge” between the new and existing walls – and that's a very unstable structure. Instead, the walls have to be made taller from the bottom up. One way to do that is by installing new, taller wall studs alongside the existing studs.
What is the difference between a vaulted and a cathedral ceiling? Cathedral ceilings have two equal, sloping sides that are parallel to the pitch of the roof and the two sides of the slopes meet at a ridge which runs across the length of the room. Vaulted ceilings do not necessarily follow the pitch of the roof.
If your structure does not need to be well insulated, you can simply sandwich a layer of aluminum foil insulation or rigid foam between your finish ceiling and a layer of sheathing. Place the sheathing layer on top of the insulation and secure it with nails that pass through the insulation into the rafters.
Shop This Look A tray ceiling, also called an inverted or recessed ceiling, features a center section that is several inches (or several feet) higher than the areas around the perimeter of the room. This design allows for the use of colors painted on the trim that can turn a bland ceiling into a focal point.
There are many alterations one can make to a house. Moving walls, doorways, adding fireplaces, etc, and so on. To raise the second floor ceilings, you would need to remove the roof. There is no way to raise the first floor ceilings without removing the second floor.
The next option you can consider in opening up the ceiling frame is to remove some of the ceiling joists or collar ties while leaving the full complement of rafters in place. Typically, this is done by leaving every third collar tie and removing the two in between, as shown in the drawing. You still have rafters 16 in.